Anytone at d868uv gps codeplug software#

Anytone at d868uv gps codeplug software#

Then the codeplug is uploaded to the PC software from the radio - the Rx group list setting made on the radio is not reflected against that channel in the PC software, which shows the Receive Group List as 'None' still. On the radio, under the menu: Settings, Chan Set, Rx Group List, if a group list is chosen/entered, then 'Select Curr List' (such that that list is assigned to the current channel).If setting a channel with 'None' in the PC software, then downloading the codeplug with that setting to the radio, the Chan Set, Rx Group List menu again just shows the first Receive group which is configured as the highlighted option - This is highly ambiguous. Although if the channel is configured in the PC software, the None option exists. On the radio, under the menu: Settings, Chan Set, Rx Group List, There is no Option for 'None'.A better option would surely be a drop-down containing the three possible options for DMR Mode instead of the Through mode check box. That radio menu has 3 possible options: Simplex, Repeater, and Double Slot - but this is not reflected in the PC software, as only that one check box called Through Mode is shown (appearing to reflect the simplex option being chosen). On the radio, under the menu: Settings, Chan Set, DMR Mode - selecting 'Simplex' has the result of setting 'Through Mode' in the PC software app against that channel's configuration.

All these issues on D878 with latest firmware (1.10)